How To Apply Iron Ons1.Lay out the fabric. Place the t-shirt (or other cloth to which the image will be transferred) on
a hard, flat surface, and smooth out any wrinkles with the iron.The work surface should be heat
resistant and should be large enough to accommodate the entire area of the transfer with a
little room to spare.
2.Place the transfer image-side down on the fabric. Put the transfer on the cloth precisely where
you want the image to be. Be sure you have the image facing the fabric.
3.Place brown paper inside the shirt directly under the transfer paper. Unless you want the image to be printed on both sides of a shirt (if that's what you're transferring the image to), you'll
need to put something between the front and back.
4.Iron on the transfer . Carefully read the instructions given with the transfer paper. Set the iron
to the designated temperature, and wait for it to warm up. Move the iron in large circles on top of
the transfer paper. Start by focusing on the outside of the image, and gradually move toward the
center. Be sure to apply adequate pressure for an adequate amount of time for ten seconds
(see the transfer paper instructions), but keep the iron moving to
prevent scorching.
5.Wait for the image to cool. Turn off the iron when finished and let the image cool for a few
minutes.
6.Remove the backing from the transfer paper. Gently peel the backing off of the fabric.
|
